POR-15 & prep

Weather was better this weekend. Saturday there were spots of light rain so I was wheeling the monster truck in and out of the garage as it came and went.

Finished stripping and sanding.





POR-15 on all the rust or exposed bits: roof & bonnet gutters, front & rear beaver panels, sils, seams, firewall etc. POR-15 needs a tie coat within 1.5 hours. The black bits are the fresh POR-15, the grey bits are older bits of POR-15 already coated with primer.





And then I got busy with the etch primer:





Pretty much all the firewall is POR-15 with etch primer over the top.

[Jun 25 2006]